Provides technical support to the operational teams during the commissioning and start-up of the Ammonia Plant. Job Description Monitors ammonia plant operations and provides advice to the operating team; Maintains safe working conditions within the units and promotes personnel safety; Visually checks the operation of the plant, at least once per shift; Audits the operators daily check-sheets, logs, and routines to ensure they are being completed properly; Aids in the preparations of equipment for maintenance and operational changes such as switching pumps; Will ensure that process control, environmental control, and quality control parameters are followed closely while proposing changes to resolve deviations; Thoroughly knowledgeable in all areas of unit operations to assist in training operators; Participate in daily safety meetings with crewmembers; Participates in shift turnover with other Lead Operators on status and receive instructions; Completes the production report and provides a written (Email) summary to the Superintendent and Operations Manager; Reviews all Service Orders and verifies in the field that the equipment is prepared for Maintenance; Audits Safety Work Permits and provides constructive feedback on how to improve them; Ensure that operating procedures are being utilized, accurate and up to date. Job Requirements The demands described here are representative of those that must be met by the employee to successfully perform the essential functions of this position; Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions; Ability to wear and care for applicable personal protective equipment (such as, safety glasses and shoes, respirator, hard hat and ear protection, safety harness) as required by site specific requirements; Ability to work rotating 12 hour shifts (6:00 am to 6:00 pm and 6:00 pm to 6:00 am); Ability to work outdoors for long periods of time in extreme weather conditions; Ability to read and comprehend technical data; Ability to work with and around various chemicals, lubricants, and temperatures common to a chemical processing facility.